What are you looking for???

Space-E Global Deformation Plus

Easy and high-quality creation of curving surfaces.

Space-E Global Deformation PLUS

Space-E Global Deformation PLUS: Import the Springback simulation results that calculated by the external program (CAE), deform the data in Modeler. Corresponds to forward/back deform that expect the results of simulation to the opposite side.

MAIN FUNCTIONS

Re-Fit

ReFit

By inputting the prediction of deformation that has been expected by designers and quantified by CAE and CAT, this command deforms the mold shape that may have the deformation into an optimal mold shape that has been expected distortion of the molded article generated during molding.

Re-Fit

ReFit 02

Fitting the 3D model on the simulation results of Spring Forward analysis (STL format). Space-E calculates forward point automatically and fitting the shape referred to the results of the Springback analysis.

Expect Deformation

Expect Deformation

Automatically deform the model by inputting points and splines on the model before deformation and inputting points and splines after deformation corresponding to it.

Scale Warp Deformation

Scale Warp

Correspond to the shrinkage and deformation of the plastic mold.

Bending

Bending

By setting the axis, you can deform the body and face to a specified angle.

Bow

Bow

By setting the base axis, you can deform the body and face along the arc of its end points.

Twist

Twist

By setting the rotation angle to the start and end points of the base axis, you can deform twisting the body and face.