Space-E CAM
Space-E CAM "Process Design Technology" has a mechanism to meet customer's requirements, such as, various pallets and templates which contains customer’s know - how. Easy to operate will enable a beginner to create NC data quickly.
CREATION
Contour Roughing
Create tool path in rest parts when setting the value bigger than the tool radius in XY pitch of flat tool and radius tool.
Contour Roughing
Roughing considers the stock model cut by the previous process. It enables you to create a more efficient cutting path to cut the rest of material.
Contour Finishing
Create a path automatically to unfinished areas such as a gentle slope area.
Free Shape
Because this command can change any wire frame to a tool path, it can create a tool path for grooving.
3.5D to 5 Axis Conversion
Create a 2.5-Axis and a 3-Axis data easily if you specify the cutting direction on the Modeler.
Dividing angles are calculated from the coordinate systems and create cutting data from multiple directions in a single cutting process.
WIRE EDM
Easy to create wire EDM data using a 3D viewer.
EDIT
Path Optimization
Divide a tool path at the shank and holder interference. Remove or extract shank and holder interference. It enables you to cut a part as much as possible with the current tool.
Cutting Simulation
Cutting simulation can be started from the middle of the process.
Rest parts are displayed by the color map.
Cutting simulation/Check holder Interference (Batch)
Interference of the tool can be checked at once. Confirm the tool path of interference using the Modeler.
OTHER
Cutting Process Design
Easy operation by cutting process.
CAMWEB
Cutting Order Sheet is automatically created in HTML or Excel format. Customers can design their own sheet format.
Tool Data Base
Provide data of the tool maker as a tool file of Space-E/CAM. Contains the cutting conditions (feed, spindle, pitch) of the tool maker.
Postprocessor
Create a post that complies with FANUC in a simple operation by GUI. Output the required information for cutting in NC data.