Flexible modeling environment together with surface and solid functions.
Space-E Modeler is flexible modeling environment together with the surface and solid functions.
Our surface modeling is the best in the Japanese market and will enable creation and edit of complex free form shape for automotive and home electronics parts.
Hole and convex shapes can be moved in a solid model which translates from STEP and IGES.
Fillet surface can be embedded in a solid If you cannot create a fillet by the solid function.
As if operation of removing the surface, this command can edit the shape by selecting parts of the items that have been composed of a solid.
This command creates a shell body. And can set individual shell thickness per selected item.
Create solid body automatically from complex surfaces.
Complex Boolean Calculation
In addition to a general boolean function (unite, difference, intersect), this command can calculate two intersecting places by selecting a place of "unite" and "difference".
Modify Fillet Radius
Create a fillet different from the original radius value by selecting the fillet in the surface model.
Create Extract Fillet Edge
Create an edge of fillet before addition by selecting the fillet on the surface model.
Create a blending surface with variation using Space-E/Global Deformation.
Create sweep surface in normal and tangent direction of surface.
Trim By Area
Composite curves or edges can trim complex surface or solid model.
Create Parting Face
Create a parting face automatically. There are three kinds of parting face commands according to the purpose.
Matching neighbor surfaces considered normal vector, tangent vector and curvature.
Detect Model Differences
You can find the difference in places by comparing the model before and after the change.
Measure Curvature Radius
You can display the fillet radius by specifying the fillet of model.
Space-E displays highlight the undercut after section on the product model. You can also create boundary lines around the undercut.
Split Cavity & Core
Divide a products features into cavity and core sides. This command can apply to surface and solid model.
You can easily create 2D drawings from the model that was created in 3D, finish the drawing using fulfilling drafting function.